SRNE Hybrid Inverter (HESP4855S100-H)
₱50,000.00
Tax included
Design characteristics:
·Adopting full-digital double closed loop control, combined with advanced SPWM.technology and pure sine wave output.
·Advanced MPPT technology with efficiency of 99.9％.
·LCD screen and three LED indicator lights can clearly indicate the status and data.
·Intelligent and variable-speed fan, efficiently dissipate heat and extend system life.
·Multiple safety protection functions: short circuit protection, overload protection,reverse polarity protection and so on.
| Model | HES4855S100-H |
| Battery Input Parameters | |
| Battery Type | Lead-acid Battery or Lithium Battery |
| Rated Battery Input Voltage | 48V ( Minimum Startup Voltage 44V) |
| Hybrid Charging Maxi mum Charging Current |
100A |
| Battery Voltage Range | 40Vdc~60Vdc ± 0.6Vdc(Undervoltage Warning/Shutdown Voltage/Overvoltage Warning/Overvoltage Recovery...) |
| Solar Input Parameters | |
| Maximum PV Open-circuit Voltage |
500Vdc |
| PV Working Voltage Range | 120-500Vdc |
| MPPT Voltage Range | 120-450Vdc |
| Maximum PV Input Current | 22A |
| Maximum PV Input Power | 6000W |
| Maximum PV Charging Current | 100A |
| Mains Input Parameters | |
| Mains Maximum Charging Current |
60A |
| Rated Input Voltage | 220/230Vac |
| Input Voltage Range | UPS Mains Mode：(170Vac~280Vac)土2% APL Generator Mode：(90Vac-280Vac)±2% |
| Frequency | 50Hz/ 60Hz (Automatic Detection) |
| Mains Charging Efficiency | >95% |
| Switch Time (bypass and inverter) | Switch Time (bypass and inverter) |
| Maximum Bypass Overload Current | 40A |
| AC Output Parameter | |
| Output Voltage Waveform | Pure Sine Wave |
| Rated Output Voltage (Vac) | 230Vac (200/208/220/240Vac） |
| Rated Output Power (VA) | 5500（4780/4970/5260/5500） |
| Rated Output Power(W) | 5500（4780/4970/5260/5500） |
| Peak Power | 11000VA |
| On-load Motor Capacity | 4HP |
| Output Frequency Range(Hz) | 50Hz土0.3Hz/60Hz±0.3Hz |
| Maximum Efficiency | >90% |
| No-load Loss | Non Energy-saving Mode: ≤100W Energy-saving Mode：≤50W (Manual Setup） |
| Basic Parameters | |
| Certificate | CE(IEC 62109-1) |
| EMC Certification Level | EN61000 |
| Working Temperature Range | -25°C ~ 55°C,>45°C Derating |
| Storage Temperature Range | -25°C ~ 60°C |
| Humidity Range | 0% to 100% |
| Waterproof Grade | IP65 |
| Size(L*W*D) | 556mm*345mm*182mm |
| Weight (kg) | 20 |
Functional characteristics:
·It has the function of segmented charging and discharging.
·Backflow prevention and grid connection function.
·Insulation resistance and leakage current detection function.
·Working without battery under special conditions.
·Lithium battery activation function, which can be triggered by mains or PV.
·Power saving mode, reduce no-load loss.
.Four charging modes: PV Only, Mains Priority, PV Priority and PV&Mains hybrid charging.
·Two output modes: mains bypass and inverter output, with UPS function.
·360 °all-round protection.
.Allow lead-acid battery and lithium battery access.
·ON/OFF switch controls the inverter AC output
·Grid-connected mode can be set.
2022-10-28
Design characteristics:
·Adopting full-digital double closed loop control, combined with advanced SPWM.technology and pure sine wave output.
·Advanced MPPT technology with efficiency of 99.9％.
·LCD screen and three LED indicator lights can clearly indicate the status and data.
·Intelligent and variable-speed fan, efficiently dissipate heat and extend system life.
·Multiple safety protection functions: short circuit protection, overload protection,reverse polarity protection and so on.